BASKET
0You have 0 items in your basket.
VAT total | £0.00 |
Total Goods (inc VAT) | £0.00 |
This dovetail cutter produces a tight reliable joint for drawers, boxes etc.D 1/2 inchD 12.7 mmC 1/2 inchC 12.7 mmOverall length 60.5 mmA 104 degreesShank Diameter 1/4 inch
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.D 5/8 inchD 16 mmC 19 mmOL 60 mm
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.D 3/4 inchD 19.1 mmC 25 mmOL 67 mm
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.D 25/32 inchD 20 mmC 25 mmOL 57 mm
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.D 1/4 inchD 6.3 mmC 3/4 inchC 19.1 mmOverall length 62.5 mmShank Diameter 1/4 inch
Used for trimming plastic or plywood overlays.D 1/2 inchD 12.7 mmC 1 inchC 25.4 mmB 12.7 mmA 90 degreesOverall length 77 mmShank Diameter 1/4 inch
12mm radius Bead/nosing cutter.D 42.9 mmC 25.4 mmC2 40 mmR 12.7 mmShank Diameter 1/2 inch
By raising the cutter, the top quirk is removed. Alternative bearing Refs. B95A & B127A.D 35 mmC 13.5 mmB 12.7 mmR 4 mmOverall length 65 mmShank Diameter 1/4 inch
These tools produce the same type of joint & use the same components as the combination PSC sets.D 46 mmD2 42 mmC 15 mmC2 6.3 mmB 22 mmR 10 mmShank Diameter 1/2 inchTimber thickness min. 21 mmTimber thickness...
Used for trimming plastic or plywood overlays.D 1/2 inchD 12.7 mmC 1 inchC 25.4 mmB 12.7 mmA 90 degreesOverall length 79.5 mmShank Diameter 1/2 inch
Shank mounted bearing profilers are ideal for template guidance.D 1/2 inchD 12.7 mmC 3/8 inchC 9.5mmOverall length 55.5 mmShank Diameter 1/4 inch
Shank mounted bearing profilers are ideal for template guidance.
For producing ovolo and rounding over edge moulds, using a side fence or back fence.D 1/2 inchD 12.7 mmC 23/64 inchC 9 mmR 4.8 mmOverall length 51.5 mmShank Diameter 1/4 inch
For coves and part of a rule joint. 1/2" Shank.D1 20 mmCut length 18 mmOverall length 57 mmR1 10 mm
Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template.D 8 mmC 35 mmOL 70 mmShank length 23 mmShank Diameter 1/4 inch
© Machine Mart 2024, All rights reserved.
Machine Mart Ltd 211 Lower Parliament Street, Nottingham NG1 1GN
Sorry, a problem occurred with the server. Please try again later.
Thank you, you will be emailed when this product comes back in stock.
Enter your email below to receive immediate notification when this item is back in stock.
Please enter an email address.
Please enter a valid email address.