BASKET
0You have 0 items in your basket.
VAT total | £0.00 |
Total Goods (inc VAT) | £0.00 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.D 3/4 inchD 19.1 mmC 3/4 inchC 19.1 mmOverall length 59.5 mmShank Diameter 1/4 inch
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.D 3/4 inchD 19.1 mmC 25 mmOL 67 mm
Shank mounted bearing profilers are ideal for template guidance.
These cutters are for Trend Craft Dovetail Jigs.D 19.1 mmC 25 mmOL 65 mmA 97 degreesShank Diameter 1/2 inch
Template thickness should be 5mm thicker than cut length of cutter.Can be used to rout both tenons and housings.D 3/4 inchD 19.1 mmC 11.1 mmB 19.1 mm
Two flute TC cutter giving good chip clearance.D 3/4 inchD 19.1 mmC 19 mmOL 51 mmShank Diameter 1/4 inch
Self-guiding trimmers with bearings mounted on end of cutter.D 3/4 inchD 19.1 mmC 14 mmB 19.1 mmA 90 degreesOverall length 60 mmShank Diameter 1/4 inch
For trimming and profiling timber man-made board. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.D 3/4 inchD 19.1 mmC 50 mmOverall length...
Profiler with shank mounted bearing guides.D 3/4 inchD 19.1 mmC 50 mmB 19.1 mmA 90 degrees
Profiler with shank mounted bearing guides.D 19.1 mmC 1 inchC 25.4 mmB 19.1 mmA 90 degreesOverall length 78 mmShank Diameter 1/2 inch
© Machine Mart 2024, All rights reserved.
Machine Mart Ltd 211 Lower Parliament Street, Nottingham NG1 1GN
Sorry, a problem occurred with the server. Please try again later.
Thank you, you will be emailed when this product comes back in stock.
Enter your email below to receive immediate notification when this item is back in stock.
Please enter an email address.
Please enter a valid email address.