BASKET
0You have 0 items in your basket.
VAT total | £0.00 |
Total Goods (inc VAT) | £0.00 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics,Two flutes give a clean finish to cut edgesAll cutters above and including 9.5mm diameter, have TCT plunge centre...
Profiler with shank mounted bearing guides.D 1/2 inchD 12.7 mmC 32 mmB 12.7 mmA 90 degrees
Cutter are designed to plunge and machine or mill lateral slots.D 8 mmC 14 mmOL 120 mm
Comprises of the 8mm diameter Craft Range cutter Ref. C011X1/4TC and 13mm plastic guide bush.This product includes: 1 x Straight 8mm (5/16" ) 1 x 13mm Template Guide Bush
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.D 3 mmC 3/8 inchC 9.5 mmOverall length 56.5 mmShank Diameter 1/4 inch
Self-guiding cutters for rounding over edges do not require a side fence.D 32 mmC 16 mmB 9.5 mmB2 12.7 mmR 9.5 mm
Self-guiding cutters for rounding over edges do not require a side fence.D 42.7 mmC 22.3 mmOL 70 mmB 9.5 mmB2 12.7 mmR 15 mm
For use with T5 and other compatible routers. Comprises a 1/8 inch down cut spiral router cutter Ref. S55/02LHX1/4STC, guide bush and inlay collar.Guide bush ID 4.8 mmGuide bush OD 7.9 mmCollar OD 14.28...
An initial cut with a straight cutter is required to produce the drawer pull profile.D 19 mmC 13 mmR 4 mmOverall Length 48 mmShank Diameter 1/4 inch
A large version of a classic moulding for glazing bars, also popular for table and dresser top edge finishes.D 36 mmD2 16 mmC 33 mmR 20 mmShank Diameter 1/2 inch
Classic skirting board mould.D 37 mmC 40 mmB 16 mmR 13.5 mmShank Diameter 1/2 inch
Solid Carbide replaceable blades.D 1/2 inchD 12.7 mmC 49.5 mmOL 100 mmShank Diameter 1/2 inch
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.D 36 mmKerf 2.0 mmNo. of Teeth 2
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.D 11/16 inchD 17.5 mmC 1 inchC 25.4 mmShank Diameter 1/4 inchOL 65mm
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre...
© Machine Mart 2024, All rights reserved.
Machine Mart Ltd 211 Lower Parliament Street, Nottingham NG1 1GN
Sorry, a problem occurred with the server. Please try again later.
Thank you, you will be emailed when this product comes back in stock.
Enter your email below to receive immediate notification when this item is back in stock.
Please enter an email address.
Please enter a valid email address.