BASKET
0You have 0 items in your basket.
VAT total | £0.00 |
Total Goods (inc VAT) | £0.00 |
To increase gluing area producing a strong joint in drawer production.D 25.4 mmC 12.7 mm
For veining, panelling, 'V' grooving, bevelling & chamfering.D 1/2 inchD 12.7 mmC 7/16 inchC 13 mmC2 13 mmC3 11 mmA 60 degreesOverall length 53 mmShank Diameter 1/4 inch
For veining, panelling, 'V' grooving, bevelling & chamfering.D 1/2 inchD 12.7 mmC 1/2 inchC 13 mmC2 9 mmC3 6 mmA 45 degreesOverall length 53 mmShank Diameter 1/4 inch
Used for trimming plastic or plywood overlays.D 1/2 inchD 12.7 mmC 50 mmB 12.7 mmA 90 degreesOverall length 104.5Shank Diameter 1/2 inch
Profiler with shank mounted bearing guides.D 1/2 inchD 12.7 mmC 32 mmB 12.7 mmA 90 degrees
Solid Carbide replaceable blades.D 1/2 inchD 12.7 mmC 49.5 mmOL 100 mmShank Diameter 1/2 inch
This dovetail cutter produces a tight reliable joint for drawers, boxes etc.D 1/2 inchD 12.7 mmC 1/2 inchC 12.7 mmOverall length 60.5 mmA 104 degreesShank Diameter 1/4 inch
Used for trimming plastic or plywood overlays.D 1/2 inchD 12.7 mmC 1 inchC 25.4 mmB 12.7 mmA 90 degreesOverall length 77 mmShank Diameter 1/4 inch
Used for trimming plastic or plywood overlays.D 1/2 inchD 12.7 mmC 1 inchC 25.4 mmB 12.7 mmA 90 degreesOverall length 79.5 mmShank Diameter 1/2 inch
Shank mounted bearing profilers are ideal for template guidance.D 1/2 inchD 12.7 mmC 3/8 inchC 9.5mmOverall length 55.5 mmShank Diameter 1/4 inch
For producing ovolo and rounding over edge moulds, using a side fence or back fence.D 1/2 inchD 12.7 mmC 23/64 inchC 9 mmR 4.8 mmOverall length 51.5 mmShank Diameter 1/4 inch
This cutter is for Trend Craft Dovetail Jigs.D 12.7 mmC 20 mmOL 60 mmA 98 degreesShank Diameter 1/4 inch
A two fluted cutter to give a clean finish to the cut edges.Use only on professional routers with 80mm deep plunge and suitable one piece multi-slit collet to ensure safe cutter retraction into base.D...
For coves and part of a rule joint with a 1/4" shank diameter.D 8 mmC 1/2 inchC 12.7 mmR 4 mmOL 46 mm
For coves and part of a rule joint with 1/2" shank diameter.D 12.7 mmC 19 mmR 1/4 inchR 6.3 mmOL 56 mm
© Machine Mart 2024, All rights reserved.
Machine Mart Ltd 211 Lower Parliament Street, Nottingham NG1 1GN
Sorry, a problem occurred with the server. Please try again later.
Thank you, you will be emailed when this product comes back in stock.
Enter your email below to receive immediate notification when this item is back in stock.
Please enter an email address.
Please enter a valid email address.