Quality made tool designed to aid fast tensioning and securing of CVJ boot banding material. Simply insert banding, tension using winding mechanism, and then pull over lever to cut the band to length....

The Sealey BSL103 CVJ boot tool installs CVJ boots without removing drive shafts from the vehicle or the CV joint from the drive shaft, thus saving time and any potential damage to the CV joint. While...

Comprehensive set for the removal and installation of nuts on McPherson struts. Covers a large range of vehicle applications.

Used to level the steering wheel before locking into position, prior to checking/adjusting the front wheel alignment. Ideal for use with Four-Wheel Laser Aligners such as Model No. GA70. Self-retaining...

Quickly removes the CV joint from the drive shaft without damaging the joint, and keeps hands free for releasing retaining circlip. Reduces risk of damage to transmission. Saves on labour time and suitable...

The tie rod coupler from Power-Tec attaches to broken tie rods, creating a temporary fix that allows the user to tow a vehicle a short distance for easy loading/unloading onto recovery vehicles and for...

The tie rod end pliers from Power-Tec pulls together separated tie end balls and sockets, creating a temporary fix that allows the user to tow a vehicle a short distance for easy loading/unloading onto...

Permits the removal of the top suspension nut by holding the strut piston, so it doesn’t rotate while turning the nut. The go-through design of the socket and ratchet allows the extension to pass through...

Steel body CVJ Boot band pliers with 3/8"Sq drive, for the assembly of new stainless steel bands on drive shafts where a torque setting is required.

Universal CVJ boot made from high quality neoprene material suitable for use with air operated boot installation tools. Supplied with fitting kit including clips and cutting guide. Suitable for most car...

Designed for the second generation of wheel bearing found on modern vehicles. These bearings are lightweight with an integral mounting flange. They are also pre-loaded with a retaining ring that secures...

Designed for the second generation of wheel bearing found on modern vehicles. These bearings are lightweight with an integral mounting flange. They are also pre-loaded with a retaining ring that secures...

Designed for the installation and removal of slotted bushes on HGV spring suspension. Includes a 12tonne hydraulic cylinder (supplied without hydraulic pump). Installation protects the bush using the parallel...

The Sealey GA50 has an optical system uses low radiation laser beam to indicate toe-in or toe-out, and a single leg configuration and reversible contact probes allow on ramp use.Works on practically all...

The GA44 steering turntables are supplied as a pair and allow the user to record an accurate measurement of toe-in/out and full lock.With measurements taken whilst the vehicle is stationary, these turntables...