BASKET
0You have 0 items in your basket.
VAT total | £0.00 |
Total Goods (inc VAT) | £0.00 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.D 63/64 inchD 25 mmC 25 mmOL 65 mm
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.Two flutes give a clean finish to cut edges.All cutters above and including 9.5mm diameter, have TCT plunge centre...
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.D 8 mmC 25 mmOverall length 68.5 mmShank Diameter 8 mm
For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.D 15/64 inchD 6 mmC 16 mmOL 56.5 mmShank Diameter 1/4...
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.D 3/4 inchD 19.1 mmC 3/4 inchC 19.1 mmOverall length 59.5 mmShank Diameter 1/4 inch
This two flute cutter gives a finer finish and has better plunge cutting characteristics.D 1/4 inchD 6.3 mmC 28 mmOL 63 mmShank Diameter 1/4 inch
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.D 8 mmC 25 mmOverall length 68.5 mmShank Diameter 1/4 inch
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics,Two flutes give a clean finish to cut edgesAll cutters above and including 9.5mm diameter, have TCT plunge centre...
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.D 3 mmC 3/8 inchC 9.5 mmOverall length 56.5 mmShank Diameter 1/4 inch
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.D 11/16 inchD 17.5 mmC 1 inchC 25.4 mmShank Diameter 1/4 inchOL 65mm
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre...
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.D 5/8 inchD 16 mmC 19 mmOL 60 mm
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.D 3/4 inchD 19.1 mmC 25 mmOL 67 mm
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.D 25/32 inchD 20 mmC 25 mmOL 57 mm
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.D 1/4 inchD 6.3 mmC 3/4 inchC 19.1 mmOverall length 62.5 mmShank Diameter 1/4 inch
© Machine Mart 2024, All rights reserved.
Machine Mart Ltd 211 Lower Parliament Street, Nottingham NG1 1GN
Sorry, a problem occurred with the server. Please try again later.
Thank you, you will be emailed when this product comes back in stock.
Enter your email below to receive immediate notification when this item is back in stock.
Please enter an email address.
Please enter a valid email address.