BASKET
0You have 0 items in your basket.
VAT total | £0.00 |
Total Goods (inc VAT) | £0.00 |
This flexible honing brush set with 120 grit and 8/12/20mm shafts are complete with a 1/4" quick change shank for use in a cordless drill. Suitable for use in a variety of applications including surface...
A 100mm abrasive brush coated with aluminium oxide which is ideal for surface preparation, conditioning & finishing. Removing paint, varnish, rust & scale from metal, wood, fibreglass, granite, brick or...
A really useful 13mm drill chuck and adaptor for mains powered and cordless light hammer drills with SDS-plus Tool Holders and hammer stop
A 3 piece internal & external deburr/chamfer tool set. Ideal for repairing damaged bolts & fasteners.
Part of the Laser range of cordless drill accessories. Takes standard 1/4" shank bits and 300mm long.Comes with a detachable side handle which can be mounted either side. Also has storage for screwdriver...
Trend's useful power-drill driven, 2-piece 'Pro Grabit' provides the perfect solution for removing damaged screws & fasteners. Each ingeniously designed 'bit' is double-ended - one 'end' is used as a burnisher...
The QuickSnap Adapters are convenient problem solvers for drilling, screw driving and impact drilling in tight spaces and close to the edges
The QuickSnap Adapters are convenient problem solvers for drilling, screw driving and impact drilling in tight spaces and close to the edges
A set of two handy adaptors which convert your SDS drills to drive sockets in a matter of seconds. With a 3/8" Drive adaptor and a 1/2" drive adaptor, suitable for a wide range of applications. Simply...
This adapter is easy to operate and can be locked in 16 different positions (360°) without having to remove the adapter from the cordless screwdriver.
The GHA FC2 is highly flexibility and converts the drill/driver into a fully fledged SDS-plus rotary hammer. Powerful – Effortless drilling is possible even in hard concrete thanks to the new impact m...
This dust collection cover from Bosch has been designed for the SDS-plus drill bit with 160 mm - 210 mm length and is highly efficient when drilling vertically or horizontally.
This easy to use nut drill jig allows the safety wire holes to be drilled through the head of bolts or nuts across the diagonal.
A 9.5mm (3/8 inch) diameter stepped High Speed Steel drill for use with Pocket Hole Jigs.D 3/8 inchD 9.5 mmShank Diameter 1/4 inch hexPilot diameter 4.2mmPilot length 13 mmThe Trend Snappy hex shank allows...
Self-centring drill for the accurate drilling of pilot holes for fittings such as hinges to ensure exact alignment .D 11/64 inchD 4.36 mmShank Diameter 1/4 inch hexScrew size No.12 (5.5 mm)The Trend Snappy...
© Machine Mart 2024, All rights reserved.
Machine Mart Ltd 211 Lower Parliament Street, Nottingham NG1 1GN
Sorry, a problem occurred with the server. Please try again later.
Thank you, you will be emailed when this product comes back in stock.
Enter your email below to receive immediate notification when this item is back in stock.
Please enter an email address.
Please enter a valid email address.